Citristrip Paint & Varnish Stripping Gel

$14.99

A better smelling way to strip multiple layers of paint outdoors and indoors, the gel clings well to vertical surfaces. Citristrip® Safer Paint & Varnish Stripping Gel Non-NMP is easy to use because it stays wet and active for up to 24 hours allowing stripping of multiple layers in one step.

 

Description

Paint Stripping Basics

Home improvement can be challenging. Before you jump in headfirst, take a minute to read these basics and check the product label for additional directions and tools. Visit our Projects Section for more specific sample projects.

1. Preparation

Remove all hardware from the panel to be stripped. Spread out a drop cloth or newspaper to cover the work area. Work in an outdoor or well-ventilated area out of direct sun and away from strong breezes. If working inside, open all windows and doors to maintain a cross ventilation in the work area. Mask and tape off areas not to be stripped.

2. Apply The Remover

Wear chemical splash goggles and chemical-resistant gloves and apply the stripper according to package directions. This may be by brushing or spraying. For brush-applied strippers, brush in one direction only. For aerosol, point the sprayer away from you. Hold the can about 10″-12″ from surface to be stripped. Use short sweeping motions to apply.

3. Let The Remover Work

Follow the “Directions For Use” on the remover label to know how long to let the remover work. Let the remover do its job. If you scrape too soon, the remover may not have time to soften or penetrate through all layers.

4. Scrape It Off

Scrape off the softened paint using the plastic stripping tool to avoid harming the surface.

5. Remove The Residue

Use a clean abrasive stripping pad with Citristrip® Paint Stripper After Wash to loosen remaining finish and remove any residue. Surface should be completely clean and dry before refinishing.

6. Clean-Up

Return any unused stripper to the original container. Clean-up materials should be left outside to dry before throwing out. Lay contaminated rags and paper out flat to dry before disposing of them.